Laying the feeding tube
- Lay the feeding tube from the pressure reducer/tank to the plants.
- The feeding tube is easier to lay when you heat it up (warm water, sun) prior to assembly. Do not kink the tube!
- Cut the tube through and insert a T-piece (1) for every tube. Use an end-piece (2) at the end of the system.
- Always push on the tubes completely (3).
- The pre-assembled drip tubes in the set can also be left on the T-piece/end-piece for first-time assembly.
Info: The feeding tube is not suitable for direct laying in the soil or in walls. Use an empty conduit in this case; joints must remain accessible.
Important note: Do not use a lubricant (grease, soap, etc.) for pushing on! This will damage the tube.
Tropf-Blumat User Manual
Intelligent Watering
Die Intelligente Bewässerung
L’arrosage Intelligent
L’irrigazione Intelligente
La Irrigación Inteligente
De Intelligente Bewatering
Интелигентното Напояване
Chytré Zavlažování
Den Intelligente Vanding
Intelligentne Kastmine
Το Εξυπνο Ποτισμα
Älykäs Kastelujärjestelmä
Inteligentno Zalijevanje
Az Intelligens Öntözés
インテリジェントな自動給水システム
Išmanusis Laistymas
Viedā Apūdeņošana
Den Intelligente Vanningen
Inteligetne Nawadnianie
A Irrigação Inteligente
Sistem De Irigare Inteligent
Inteligentno Zalivanje
Интеллектуальный Полив
Den Intelligenta Bevattningen
Inteligentni Sistem Za Zalivanje
Inteligentné Zavlažovanie
Akilli Sulama